Installing A Replacement Fuser - Pitney Bowes DP40S Operator's Manual

3 • Consumables and Maintenance
Installing a
Replacement
Fuser
3-4
1. Switch off the printer as described on page 2-2 and open the top cover.
Caution
The fuser is very HOT after
the printer has been printing.
Let it cool before replacing it.
2. Turn the fuser lock lever to the
right to unlock the fuser.
3. Grasp the fuser handle and
lift the fuser out of the printer.
Dispose of it in accordance
with local regulations.
4. Unpack the new fuser and
lower it into the printer.
5. Turn the lock lever to the left
to lock the fuser in place.
6. Close the top cover and turn
the printer on.
SV62531 Rev. B