Cleaning The Led Heads; Cleaning The Printer Case - Pitney Bowes DP40S Operator's Manual

Cleaning the
LED heads
Cleaning the
printer Casing
SV62531 Rev. B
3 • Consumables and Maintenance
You are advised to clean the LED heads:
• Any time you replace a toner cartridge (a LED lens cleaner is enclosed
with each replacement toner cartridge).
• If printing is showing signs of faded images, white stripes or blurred
letters.
You can use an LED lens cleaner or dry, soft cloth for cleaning the LED
heads.
1. Open the top cover
2. With an LED lens cleaner or soft
cloth, gently wipe each of the four
heads.
Move the cleaner as shown, using
a clean section of the cleaner
with each pass. Be careful not to
damage the guards.
3. Close the top cover.
1. Follow the correct steps to turn the printer off.
2. Wipe the printer surface with a soft cloth moistened sparingly with water
or neutral detergent.
3. Use a soft, dry cloth to dry the printer surface.
4. Turn on the printer.
3-7