Loading Tray 1 - Pitney Bowes DP40S Operator's Manual

Loading Tray 1

SV62531 Rev. B
1. Pull out the tray.
2. Press the paper rear stopper tab and adjust the tab to the required
paper size.
Adjust Rear Stopper tab
3. Fan the paper to be loaded then jog the stack on a flat surface to align it.
4. Load the paper (face down and top edge towards the right for letterhead
paper), press the tab on the paper guide and adjust the guides for a
snug fit to the paper without restricting paper feed.
Load Paper
To avoid paper jams:
• Do not leave space between the paper and the guides or rear stopper.
• Do not overfill the paper tray. Capacity depends on the paper type.
• Do not load damaged paper.
• Do not load paper of different sizes or types at the same time.
5. Gently push the tray back into the printer.
2 • Getting Started
2-3