Table of Contents
Advertisement
2 • Getting Started
Windows
Installation
Macintosh
Installation
2-10
Parallel (LPT1) Driver Install
The installation procedure may vary slightly depending on the operating
system you are using. Drivers are provided for Windows 7/Vista/XP/2000/
Me/98.
1. Make sure the parallel cable is connected and that your printer is turned
OFF.
2. Insert the supplied CD into your CD-ROM drive. The CD will autorun. If it
does not autorun, 'explore' the CD and double click 'setup.htm' to launch
the CD menu.
3. Click either the 'Windows 32-Bit Drivers' or the 'Windows 64-Bit Drivers'
button, as required.
4. Follow the on-screen instructions to copy the drivers to a folder on your
PC (default folder c:\PitneyBowes_dr).
5. Exit the CD menu.
6. On your PC, select [Start] → [Printers and Faxes] then select [Add a
Printer].
7. Select [Local Printer]. Click [Next].
8. Select [LPT1]. Click [Next].
9. At the Install Printer screen, select 'Have Disk'. Browse to the
PitneyBowes_dr folder, and to the actual driver you want (PS, PCL or
PCL6). Click [Next].
10. If prompted, type a name for your printer. Click [Next].
11. If prompted, select "Do not share this printer." Click [Next].
12. Follow the on-screen instructions to compete the installation. Click
[Finish].
13. Switch the printer ON.
Print a Test Page
1. Click [Start] → [Settings] → [Printers].
2. Right click the printer icon and go to [Properties].
3. Click the [General Tab] and click the [Print Test Page] button.
4. Click [OK] to close the Properties window.
If you use an Apple Macintosh and require drivers and utilities, please
contact your machine supplier. Contact details are given on a separate
document supplied with your system
SV62531 Rev. B
Advertisement
Table of Contents
