7. Have another person hold the switch at the selected wall location while
you secure it to the wall with the M4x32mm screws provided. Refer to
Figure 51.
Figure 51. Installing the Switch on a Concrete Wall
8. Install the other switches of the stack.
9. Go to Chapter 7, "Building the Trunk with the Default SFP+ S1 and S2
10Gbps Stacking Ports" on page 131 or Chapter 8, "Building the Stack
with Gigabit or 5G Multi-speed Ports" on page 149.
x530 Series Installation Guide for Stand-alone Switches
A T -x
5 3 0
-2 8 G
T X m
4597
129