Figure 12: X530-18Ghxm Copper Ports - Allied Telesis x530 Series Installation Manual

Table 10. x530-10GHXm Copper Ports 1 - 8 LED Functions (Continued)
LED Ports
Solid Green
Solid Amber
Flashing
Amber
PoE++ 1-8
Off
x530-18GHXm
The LEDs indicate Link/Activity (L/A) and PoE (PD ON/PD ERR/MAX
CURRENT) information. These LEDs are shown in Figure 12.
The states of the x530-18GHXm LEDs are described in Table 11 on
page 42.
State
PD On - The switch is delivering power to a
powered device connected to the port.
PD Error - The switch has shut down PoE on the
port because of a fault condition.
PD Max Current - The switch has detected a
powered device on the port but is not delivering
power to it because doing so would exceed its
available power budget.
No PD - This LED state can result from the following
conditions:
- The port is not connected to a powered device or
the device is powered off.
- The port is disabled in the management software.
- PoE is disabled on the port.
- The LEDs are turned off. To turn on the LEDs, use
the eco-friendly button.
L/A LED
1 3 5
2 4 6
Figure 12. x530-18GHXm Copper Ports
x530 Series Installation Guide for Virtual Chassis Stacking
Description
PoE LED
7 9 11 13 15
8 10 12 14 16
41