Dalsa Linea Lite GigE Series User Manual page 79

Direction Source
RotaryEncoder
Internal Scan Direction
Gain Selector
Sensor Analog
Digital Row 1
Digital Row 2
Digital Red
Digital Blue
Digital Green
Gain
Black Level Selector
Black Level (in DN)
Parallax Correction Pixel
Stretch
Parallax Correction Line
Selector
Red_Blue
Linea Lite GigE Series Camera
sensorScanDirectionSource
Internal
Line 1
Line 2
Line 3
sensorScanDirection
Forward
Reverse
GainSelector
Digital
Gain
BlackLevelSelector
Digital
BlackLevel
ParallaxCorrectionPixelStretch
ParallaxCorrectionLineSelector
Green
Direction determined by value of:
Internal Internal Scan Direction
Encoder Rotary encoder. Channel A and B from encoder
go to GPIO 1 and GPIO 2, respectively.
Direction is determined from phase.
Available when
Rotary Encoder Output Mode
Control category).
Pin 1 (Low: forward, high: reverse). Available
GPIO1
when Trigger
Pin 3 (Low: forward, high: reverse). Available
GPIO2
when Trigger Source
Pin 6 (Low: forward, high: reverse). Available
GPIO3
when Trigger Source
Specifies the scan direction when
Source is set to Internal,
Forward Forward scan direction.
Reverse Revers scan direction
Selects which gain is controlled when adjusting
gain features.
Apply a digital gain adjustment to the entire
DigitalAll
image. Gain applied after row gains.
Final digital gain = (Row gain * Digital gain)
SensorAnalog Sensor analog gain. Possible values are 0.6 -1.
DigitalRow1 Gain applied to first sensor row.
Available only when
Dynamic Range or Multi-Row.
DigitalRow2 Gain applied to second sensor row.
Available only when
Dynamic Range or Multi-Row.
DigitalRed Gain applied to red channel. Available for color
models only.
DigitalBlue Gain applied to blue channel. Available for color
models only.
DigitalGreen Gain applied to green channel. Available for
color models only.
Sets the selected gain as an am plification factor
applied to the im age.
Selects which tap is controlled by the Black
Level feature.
DigitalAll Digital black level offset.
Black level (offset) in DN.
Sets the parallax correction value of the
selected line.
Selects the line to adjust the parallax
correction.
Red_Blue Red and blue line.
Green Green line.
feature.
Trigger Source is Encoder and
is Motion (see I/O
Sourcee is not Rotary Encoder.
is not Rotary Encoder.
is not Rotary Encoder.
Direction
Sensor TDI Mode is High
Sensor TDI Mode is High
Operational Reference • 77
Beginner
Beginner
DFNC
Beginner
Beginner
Beginner
Expert
Beginner
DFNC