Dalsa Linea Lite GigE Series User Manual page 104

Metadata ChunkSelector
Selector
cyclingPresetCurrentActiveSet
Metadata Enable ChunkEnable
Chunk Binning ChunkBinningHorizontal
Horizontal
Chunk Binning ChunkBinningVertical
Vertical
102 • Operational Reference
Selects the specific metadata to control, when enabled.
Add the
OffsetX
the metadata attached to the image.
Add the Offset Y value used during the image acquisition to the
OffsetY
metadata attached to the image. Not available for Linea Lite.
Add the
Width
metadata attached to the image.
Add the
Height
metadata attached to the image.
PixelFormat Add the
metadata attached to the image.
ExposureTime Add the
metadata attached to the image.
Add the Cycling Preset Current Active Set value used during the image
acquisition to the metadata attached to the image. Not available for
Line Lite.
Copies the
Timestamp
attached to the image.
Copies the
LineStatusAll
metadata attached to the image.
Add the
Gain
metadata attached to the image.
Counter1ValueAtReset Copies the value of the
Frame Readout, to the Metadata attached to the image. Supported
only in GenAPI compatibility mode.
DeviceID Add the
DeviceUserID Add the
TestImageSelector Add the
to the metadata attached to the image.
Add the
BinningVertical
the metadata attached to the image.
Add the
BinningHorizontal
the metadata attached to the image.
Add the
ExposureDelay
the metadata attached to the image. Supported only in GenAPI
compatibility mode.
Sets the enable state of the selected m etadata. When enabled, the
m etadata is included in the payload of the image.
False Selected metadata disabled
True Selected metadata enabled.
Num ber of horizontal pixels to combine in the payload image.
Num ber of vertical pixels to combine in the payload im age.
Horizontal Offset X value used during the image acquisition to
Width value used during the image acquisition to the
Height value used during the image acquisition to the
Pixel Format value used during the image acquisition to the
Exposure Time value used during the image acquisition to the
Timestamp Value at the start of exposure to the metadata
Line Status All value at the start of exposure to the
Gain feature value used during the image acquisition to the
Counter Value At Reset
Device ID value to the metadata attached to the image.
Device User ID value to the metadata attached to the image.
Test Image Selector value used during the image acquisition
Binning Vertical value used during the image acquisition to
Binning Horizontal value used during the image acquisition to
Exposure Delay value used during the image acquisition to
feature at the start of
Linea Lite GigE Series Camera
Expert
.Expert
Guru
Guru