Dalsa Linea Lite GigE Series User Manual page 169

Cameras displayed in blue have a proper NIC IP assigned.
Note: The Network Configuration Tool assigns a dynamic IP address, which is lost
on power down. To avoid this issue, assign a persistent IP address to the camera.
Click the 'Persistent IP Mode' (shown above) and press the Apply button to assign the IP address.
It will automatically connect to the host PC if the IP address does not conflict with other network IP
addresses. Refer to Persistent IP section for more information.
Note: Assigning two devices the same IP Address will cause conflicts.
Linea Lite GigE Series Camera
Figure 113: Network Configuration Tool – Proper IP Assigned
Troubleshooting • 167