Dalsa Linea Lite GigE Series User Manual page 116

Event Notification
Off
On
GigEVisionEvent
Event Statistic Selector
Invalid Frame Trigger
Image Lost
Packet Resend
Packet Resend Request
Dropped
Ethernet Pause Frame
Received
Event Statistic Count
Event Statistic Count
Reset
PTP Mode
Off
Automatic
Slave
114 • Operational Reference
EventNotification
GigEVisionEvent
eventStatisticSelector
InvalidFrameTrigger
ImageLost
PacketResend
PacketResendRequestDropped
EthernetPauseFrameReceived
eventStatisticCount
eventStatisticCountReset
ptpMode
Automatic
Slave
Enable Events for the event type selected by the
EventSelector feature.
Off The selected event is disabled.
On The selected event will generate a software event.
The selected event will generate a software event for SFNC
1.x compatibility.
Selects which Event statistic to display.
Counts the frame trigger occurring in an invalid Trigger
region.
Image is acquired but lost before it's been transferred.
Counts the number of individual packets that are resent.
Counts the number of packet resend requests dropped. The
camera queues the packet resend requests until they are
processed. There is a limit to the number of requests that
can be queued by the camera. When a new request is
received and the queue is full, the request is dropped but
this statistic is still incremented.
Counts the number of Ethernet Pause Frame received.
Feature limited to 65536 events. See also
Support for information on Ethernet Packet size.
Display the count of the selected Event.
Reset the count of the selected Event.
Specifies the PTP (IEEE-1588: Precision Tim e Protocol)
operating mode as implemented by the Linea Lite.
Off PTP is disabled on the device.
PTP is enabled on the device. The camera can become a
Master or Slave device. The Master device is automatically
determined as per IEEE-1588.
Device will operate in PTP slave-only mode.
PAUSE Frame
Linea Lite GigE Series Camera
Expert
Expert
DFNC
Expert
DFNC
Expert
DFNC
Expert
DFNC