Table 5-6. Smartshutter Mode Commands In The "Wheel/Shutter" Configuration; Table 5-7. Smartshutter Mode Commands In The "Dual-Smartshutter" Configuration - Sutter Instrument LAMBDA 10-B Operation Manual

52
Command Tx/- Ver. Total
Delay/-
Rx
Rx All
Close Shutter Tx All
C
Rx All
NOTE: All commands indicated with "*" are not available in early versions of the LAMBDA 10-B
(those prior to Revision D).
The following two tables described the formats for the SmartShutter mode commands in the
"Wheel/Shutter" configuration versus the "Dual-Shutter Configuration".

Table 5-6. SmartShutter Mode commands in the "Wheel/Shutter" configuration.

Command Tx/- Ver. Total
Delay/-
Rx
Fast-mode Tx All
Shutter
Rx All
Soft-mode Tx All
Shutter
Rx All
Neutral Tx All
Density-mode
Shutter
Rx All

Table 5-7. SmartShutter Mode commands in the "Dual-SmartShutter" configuration.

Command Tx/- Ver. Total
Delay/-
Rx
Tx All
Fast-mode
Shutter
Rx All
Byte Value
Bytes Offset
Dec. Hex.
(Len.)
1 0 13 0D
1 0 237 ED
1 0 13 0D
Byte Value
Bytes Offset
Dec. Hex.
(Len.)
1 0 220 DC
1 0 13 0D
1 0 221 DD
1 0 13 0D
2 0 222 DE
2 1 01
- -
144 90
1 0 13 0D
Byte Value
Bytes Offset
Dec. Hex.
(Len.)
2 0 220 DC
1 1 01
- -
3 02
1 0 13 0D
LAMBDA 10-B OPERATION MANUAL – REV. 1.20Q (20230227)
Alt- Ctrl- ASCII
key- char def./-
Binary
pad # char.
0000 1101 <CR>
1110 1101 0237
0000 1101 <CR>
Alt- Ctrl- ASCII
key- char def./-
Binary
pad # char.
1101 1100 0220
0000 1101 <CR>
1110 1101 0221
0000 1101 <CR>
1110 1110 0222
0000 0001 0001
– -
1001 0000 0144
0000 1101 <CR>
Alt- Ctrl- ASCII
key- char def./-
Binary
pad # char.
1101 1100 0220
0000 0001 0001
– -
0000 0011 0003
0000 1101 <CR>
Description
close each time the filter
wheel moves and then will
open again at the end of the
move.
Completion indicator
Sets the state of Shutter C
closed.
Completion indicator
Description
Sets fast mode
(SmartShutter only)
Completion indicator
Sets soft mode
(SmartShutter only).
Completion indicator
Sets neutral-density mode
(SmartShutter only).
2 nd byte contains 1 - 144
indicating microsteps.
Completion indicator
Description
Sets fast mode
(SmartShutter only)
2 nd byte indicates Shutter A
(1) or B (2).
Completion indicator