Output Timing Delays - Banner Q5X Instruction Manual

Response Speed (ms)
Base Measure­
ment Rate
1
0.5 ms 0.5
1.0 ms 1
2.0 ms 3
3.0 ms 5
5.0 ms 10
Lateral Entry Response
Lateral entry to the Q5X
When lateral entry needs to be considered, the lateral entry response is added to calculate the total response time.
NOTE: The Q5X uses a dynamic measurement rate, so these response times are worst­case.

Output Timing Delays

Use this menu to select the output timing delay to be set.
On and off delay timers can be used together. The default is no delay. For Channel 2, this menu is available when the output
is set to light operate or dark operate.
The number that follows dLY on the display indicates which channel is selected.
oFF—No delay
dLAY—Delay—enables the selection of on and off delay timers
1Sho —One­shot—enables a one­shot, fixed output pulse duration
totL— Totalizer—enables an output after a defined number of targets are counted
June 22, 2023
Q5X Laser Triangulation Sensor With Analog Outputs And IO-Link Instruction Manual
2 4 8
1.5 3 7
3 5 11
5 9 20
8 15 30
15 25 45
© Banner Engineering Corp.
Filter Setting
16 32 64
13 26 50
20 45 90
40 80 150
55 110 220
85 170 340
Base Measurement
Rate (ms)
0.5
1.0
2.0
3.0
5.0
128 256 512
100 200 400
160 320 650
300 600 1200
420 840 1680
680 1350 2270
Lateral Entry Response (ms)
3
5
15
25
50
29