Banner Q5X Instruction Manual page 22

Q5X Laser Triangulation Sensor With Analog Outputs And IO-Link Instruction Manual
Method
Push Button
Remote Input
Teach the sensor.
3.
Method
Push Button
Remote Input
Expected TEACH Behavior for One-Point Window (Foreground Suppression)
Condition
One valid TEACH point with both switch
points in range (with offset, if applicable)
One invalid TEACH Point
One valid TEACH point with one switch
point within range and one switch point out of
range (with offset, if applicable)
One valid TEACH point that, after the offset,
results in a both switch points outside of the
range
See "Typical Performance Curves" on page 43
One­Point Background Suppression (bGS) (Channel 2 Only)
One-point background suppression sets a single switch point in front of the taught target distance. Objects beyond the taught
switch point are ignored. The switch point is set in front of the taught target distance by the vertical minimum object separa­
tion. See "Typical Performance Curves" on page
22
Press and hold TEACH for longer than 2 seconds.
No action required.
Press TEACH to teach the target.
Single­pulse the remote input.
Sets a window (two switch points) centered around the
taught distance. The ± window size is equal to the non­uni­
form reflectivity minimum object separation. The two switch
points always stay within the specified sensing range.
Sets a window (two switch points) centered around 150
cm. The window size is ± 10 cm.
Sets a window (two switch points) that is centered at the
TEACH point (after offset, if applicable) with one switch
point at the maximum range.
Sets a window (two switch points) centered around 150
cm. The window size is ± 10 cm.
for the minimum object separation.
43.
One-Point Background Suppression
2
1
Action
Action
T
TEACH Result
3
© Banner Engineering Corp.
Result
Light Operate
SEt and on flash alternately on the dis­
play. The 1-Pt and 2-Pt indicators flash.
Dark Operate
SEt and oFF flash alternately on the dis­
play. The 1-Pt and 2-Pt indicators flash.
N/A
Result
The sensor returns to Run mode.
Display
The sensor returns to Run mode.
---- and the window center point distance
flash alternately on the display.
---- and the ± window size flash alternately
on the display.
oFSt and the window center point distance
flash alternately on the display.
Switch
Point
June 22, 2023