National Character Set (Country); Slashed Zero (Sl.zero) - Dascom Tally T2380 User Manual

The Menu
National character set
(Country)
Country Sl.Zero
Back Next
1 2 3 4
E-US ASCII *
Set < > Exit
1 2 3 4

Slashed zero (Sl.Zero)

Country Sl.Zero
Back Next
1 2 3 4
Sl.Zero=Off *
Set < > Exit
1 2 3 4
78
Selects the national character set. These character sets can be
used according to the selected emulation.
The character sets are not necessarily available for all fonts; see
also Available character sets and fonts (page
Press Country (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Online Setting Options: See
Default Setting: E-US ASCII
Setup
Confirm the setting by pressing the Set key (1).
Selects if normal zero (0) or the slashed zero (Ø) is printed.
Press Sl.Zero (3) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Online
Setting Options: Off/On
Default Setting: Off
Setup
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Available character sets and fonts (page 142)
User guide
142).