Setting Character Density (Cpi); Setting Line Spacing (Lpi) - Dascom Tally T2380 User Manual

The Menu
Setting character density
(CPI)
Font CPI
Back Next
1 2 3 4
10 CPI *
Set < > Exit
3
1 2 4

Setting line spacing (LPI)

LPI Skip
Back Next
1 2 3 4
6 LPI *
Set < > Exit
1 2 3 4
64
Sets the characters per inch (character pitch). The higher the pa-
rameter the smaller the character spacing.
Press CPI (3) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Online
Setting Options: 5 CPI, 6 CPI, 7.5 CPI, 8.6 CPI, 10 CPI,
Setup Default Setting: 10 CPI
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Sets the lines per inch (line density). The higher the parameter the
smaller the line spacing (random LPI can be selected via the ESC
sequences).
Press LPI (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Online Setting Options: 2 LPI, 3 LPI, 4 LPI, 6 LPI, 8 LPI, 12 LPI
Default Setting: 6 LPI
Setup
Confirm the setting by pressing the Set key (1).
12 CPI, 13.3 CPI, 15 CPI, 17.1 CPI, 20 CPI
User guide