Skiping Perforation (Skip); Selecting Start Signal For Escape Sequence (Escchar) - Dascom Tally T2380 User Manual

User guide

Skiping perforation (Skip)

LPI Skip
Back Next
1 2 3 4
Skip= 0.0 Inch *
Set < > Exit
1 2 3 4
Selecting start signal for
escape sequence
(ESCChar)
ESCChar Emulate
Back Next
1 2 3 4
ESCChar=ESC *
Set < > Exit
1 2 3 4
Skips the perforation; 7 different values (in inches) can be defined.
Press Skip (3) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Online Setting Options: 0.0 to 3.5 Inch in steps of 0.5 inch
Default Setting: 0.0 Inch
Setup
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Selects the start signal for control sequences. Setting ESC: Only
character Escape can be used. Setting ESC+$$: Character Escape
or alternatively two $ characters ($$) can be used. For more infor-
mation see the section
Press ESCChar (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Online Setting Options: ESC/ESC+$$
Default Setting: ESC
Setup
Confirm the setting by pressing the Set key (1).
The $$ procedure (page
The Menu
146).
65