Additional Display Messages - Dascom Tally T2380 User Manual

Troubleshooting

Additional display messages

Message
Press any key
Loading Default
Only available
in Epson Mode
Park position
Tear paper off
Load paper from
...
126
These are not error messages, they give operating instructions and
information from the printer to the user.
Possible cause
—
The factory-set parameters are
loaded and are written into all
menus.
Functions which have no meaning
in this emulation have been
selected.
You are informed when the fanfold
paper is in the park position.
Note for the operator to tear off the
paper automatically positioned at
the tear off edge.
Paper is not available in the
selected paper path (... indicates
the active paper path). Data is in
the interface receiver buffer.
If messages appear which are not described here, please con-
tact your customer service representative with exact details of
the message.
Corrective action
To proceed press any key.
No action required.
For this function please switch
to the appropriate emulation in
the menu, see Selecting emula-
tion (Emulate), (page 66).
No action required.
Tear paper off.
Load paper, see section
Loading paper, (page 39)
User guide