Selecting The Lc Display Language - Dascom Tally T2380 User Manual

The Menu
Selecting the LC display
language
Online Trac1
Tear
1 2 3 4
Adjust Paperway
Menu Char
1 2 3 4
Print Menu
Back Next
1 2 3 4
MenLock Language
Back Next
1 2 3 4
English *
Set < > Exit
1 2 3 4
58
This section describes how to make settings in the menu, using the
selection of the national language as an example.
In this user guide all LC display messages are shown in English lan-
guage. Your printer offers also the possibility to show the display
messages in German, French, Italian, Spanish or Turkish language.
This example shows how to change from the English language to
the German language. The same procedure applies to the other lan-
guages (French, Italian, Spanish or Turkish).
Select the Setup mode by pressing the Setup key.
Online
Setup
Press the Menu key (1).
Online Setup mode and Menu mode may be disabled. Hold
down the Setup key while switching on the printer to
Setup enable menu mode. If you want to enable access to this
mode permanently, you need to change the appropriate
setting in the menu; see
Press the Next key (4) several times until the display indicates Lan-
guage.
Online
Setup
Press the Language key (3).
Online
Setup
The display now changes to Parameter mode and indicates English
in the top line.
Online
The lower line displays Set and Exit. The two arrows < (2) and > (3)
Setup represent the symbols for parameter selection ("<" indicates de-
scending and ">" ascending). Press the < (2) or > (3) key until the
desired language is displayed, in our example German.
User guide
Menu lock (MenLock) (page 80).