Table of Contents
Advertisement
4.3.3.10 IP Subnet-based VLAN Membership Configuration
The IP subnet to VLAN ID mappings can be configured here. This page allows adding, updating and deleting IP subnet to VLAN
ID mapping entries and assigning them to different ports. The MAC-based VLAN screen in
Figure 4-3-3-17: IP Subnet-based VLAN Membership Configuration page screenshot
The page includes the following fields:
Object
• Delete
• IP Address
• Mask Length
• VLAN ID
• Port Members
• Adding a New IP
subnet-based VLAN
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
Description
To delete a MAC-based VLAN entry, check this box and press save.
Indicates the subnet's IP address (Any of the subnet's host addresses can be
also provided here, the application will convert it automatically).
Indicates the subnet's mask length.
Indicates the VLAN ID the subnet will be mapped to. IP Subnet to VLAN ID is a
unique matching.
A row of check boxes for each port is displayed for each IP subnet to VLAN ID
mapping entry. To include a port in a mapping, simply check the box. To remove
or exclude the port from the mapping, make sure the box is unchecked. By
default, no ports are members and all boxes are unchecked.
Click to add a new IP subnet to VLAN ID mapping entry. An empty row is added
to the table, and the mapping can be configured as needed. Any IP
address/mask can be configured for the mapping. Legal values for the VLAN ID
are 1 to 4095.
The IP subnet to VLAN ID mapping entry is enabled when you click on "Apply".
The delete button can be used to undo the addition of new mappings. The
maximum possible IP subnet to VLAN ID mappings are limited to 128
153
User's Manual of IGS-10020HPT-U
Figure 4-3-3-17
appears.
Advertisement
Table of Contents
