Table of Contents
Advertisement
• State
• Counter
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to refresh the page; any changes made locally will be undone.
: Click to clear the counters.
■
Enabled: If a frame is received on the port, the port will be disabled.
■
Disabled: Port shut down is disabled.
The default value is "Disabled".
Specify the port state of this port. The allowed values are:
■
Enabled: To reopen ports by changing the volatile port configuration of the
ACL user module.
■
Disabled: To close ports by changing the volatile port configuration of the
ACL user module.
The default value is "Enabled".
Counts the number of frames that match this ACE.
326
User's Manual of IGS-10020HPT-U
Advertisement
Table of Contents
