Installing The Sfp Transceiver - Planet IGS-10020HPT-U User Manual

2.3.1 Installing the SFP Transceiver

The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the Industrial
Managed PoE+ Switch as

Approved PLANET SFP Transceivers
PLANET Industrial Managed PoE+ Switch supports both single mode and multi-mode SFP transceivers. The following
list of approved PLANET SFP transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100BASE-X SFP)
Model
Speed (Mbps)
MFB-FX
MFB-F20
MFB-F40
MFB-F60
MFB-F120
MFB-TFX
MFB-TF20
Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP)
Model DDM
MFB-FA20 ---
MFB-FB20 ---
MFB-TFA20 ---
MFB-TFB20 ---
Figure 2-8 appears.
Figure 2-8 : Plugging in the SFP Transceiver
Connector
Interface
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
Speed
Connector
Interface
(Mbps)
100 WDM (LC)
100 WDM (LC)
100 WDM (LC)
100 WDM (LC)
Fiber Mode Distance
Multi-Mode
Single Mode
Single Mode
Single Mode
Single Mode
Multi-Mode
Single Mode
Fiber Mode Distance
Single Mode 20km
Single Mode 20km
Single Mode 20km
Single Mode 20km
36
User's Manual of IGS-10020HPT-U
Wavelength (nm)
2km 1310nm
20km 1310nm
40km 1310nm
60km 1310nm
120km 1550nm
2km 1310nm
20km 1310nm
Wavelength (TX) Wavelength (RX) Operating Temp.
1310nm 1550nm
1550nm 1310nm
1310nm 1550nm
1550nm 1310nm
Operating Temp.
0 ~ 60℃
0 ~ 60℃
0 ~ 60℃
0 ~ 60℃
0 ~ 60℃
-40 ~ 85℃
-40 ~ 85℃
0 ~ 60℃
0 ~ 60℃
-40~85℃
-40~85℃