Table of Contents
Advertisement
• IP Option
• SIP Filter
• SIP Address
• SIP Mask
• DIP Filter
• DIP Address
• DIP Mask
IPv6 Parameters
Object
•
Next Header Filter
zero must not be able to match this entry.
■
Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than
zero must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the options flag setting for this ACE.
■
No: IPv4 frames where the options flag is set must not be able to match this entry.
■
Yes: IPv4 frames where the options flag is set must be able to match this entry.
■
Any: Any value is allowed ("don't-care").
Specify the source IP filter for this ACE.
■
Any: No source IP filter is specified. (Source IP filter is "don't-care".)
■
Host: Source IP filter is set to Host. Specify the source IP address in the SIP
Address field that appears.
■
Network: Source IP filter is set to Network. Specify the source IP address and
source IP mask in the SIP Address and SIP Mask fields that appear.
When "Host" or "Network" is selected for the source IP filter, you can enter a specific SIP
address in dotted decimal notation.
When "Network" is selected for the source IP filter, you can enter a specific SIP mask in
dotted decimal notation.
Specify the destination IP filter for this ACE.
■
Any: No destination IP filter is specified. (Destination IP filter is "don't-care".)
■
Host: Destination IP filter is set to Host. Specify the destination IP address in the
DIP Address field that appears.
■
Network: Destination IP filter is set to Network. Specify the destination IP address
and destination IP mask in the DIP Address and DIP Mask fields that appear.
When "Host" or "Network" is selected for the destination IP filter, you can enter a specific
DIP address in dotted decimal notation.
When "Network" is selected for the destination IP filter, you can enter a specific DIP mask
in dotted decimal notation.
Description
Specify the IPv6 next header filter for this ACE.
■
Any: No IPv6 next header filter is specified ("don't-care").
■
Specific: If you want to filter a specific IPv6 next header filter with this
ACE, choose this value. A field for entering an IPv6 next header filter
appears.
■
ICMP: Select ICMP to filter IPv6 ICMP protocol frames. Extra fields for
defining ICMP parameters will appear. These fields are explained later in
this help file.
■
UDP: Select UDP to filter IPv6 UDP protocol frames. Extra fields for
321
User's Manual of IGS-10020HPT-U
Advertisement
Table of Contents
