Table of Contents
Advertisement
4.3.6.6 MSTI Configuration
This page allows the user to inspect the current STP MSTI bridge instance priority configurations, and possibly change them as
well. The MSTI Configuration screen in
The page includes the following fields:
Configuration Identification
Object
• Configuration Name
• Configuration Revision
MSTI Mapping
Object
• MSTI
• VLANs Mapped
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Figure 4-3-6-8
appears.
Figure 4-3-6-8: MSTI Configuration Page Screenshot
Description
The name identifying the VLAN to MSTI mapping. Bridges must share the name and revision (see
below), as well as the VLAN-to-MSTI mapping configuration in order to share spanning trees for
MSTI's. (Intra-region). The name is at most 32 characters.
The revision of the MSTI configuration named above. This must be an integer between 0 and 65535.
Description
The bridge instance. The CIST is not available for explicit mapping, as it will receive the VLANs not
explicitly mapped.
The list of VLAN's mapped to the MSTI. The VLANs must be separated with comma and/or space. A
VLAN can only be mapped to one MSTI. A unused MSTI should just be left empty. (I.e. not having
any VLANs mapped to it.)
User's Manual of IGS-10020HPT-U
173
Advertisement
Table of Contents
