Planet IGS-10020HPT-U User Manual page 342

• Power Supply Budget
[W]
• Temperature
Threshold
• PoE Usage Threshold
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
The wire gauge for the terminal block should be in the range of 12 ~ 22 AWG@25 degrees C.
PD Classifications
A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD classification is
to provide information about the maximum power required by the PD during operation. However, to improve power management
at the PSE, the PD provides a signature about Class level.
The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all input
voltages and operational modes.
A PD will return to Class 0 to 4 in accordance with the maximum power draw as specified by
Class Usage
0 Default
1 Optional
2 Optional
3 Optional
4 Optional
Set limit value of the total PoE port providing power to the PDs.
This is PoE temperature threshold for user set up a temperature parameter for
alarm.
This is a parameter for user to define that if PoE power has been consumed to
the setting then a alarm log will be issued.
Range of maximum power used by the PD
0.44 to 12.95 watts
0.44 to 3.84 watts
3.84 to 6.49 watts
6.49 to 12.95 watts (or to 15.4 watts)
12.95 to 60 watts (or to 72 watts)
Table 4-6-1-1 Device Class.
342
User's Manual of IGS-10020HPT-U
Table 4-6-1-1.
Class Description
Classification unimplement
Very low power
Low power
Mid power
High power