4.3.1.4 SFP Module Information
The Industrial Managed PoE+ Switches have supported the SFP module with digital diagnostics
monitoring (DDM) function. This feature is also known as digital optical monitoring (DOM). You can check
the physical or operational status of an SFP module via the SFP Module Information page. This page shows
the operational status, such as the transceiver type, speed, wavelength, optical output power, optical input
power, temperature, laser bias current and transceiver supply voltage in real time. You can also use the
hyperlink of port no. to check the statistics on a specific interface. The SFP Module Information screen in
Figure 4-3-1-4
The page includes the following fields:
Object
• Type
• Speed
• Wave Length (nm)
• Distance (m)
• Temperature (C)
– SFP DDM Module Only
appears.
Figure 4-3-1-4: SFP Module Information for Switch Page Screenshot
Description
Display the type of current SFP module; the possible types are:
10GBASE-SR
10GBASE-LR
1000BASE-SX
1000BASE-LX
100BASE-FX
Display the speed of current SFP module; the speed value or description is got
from the SFP module. Different vendors SFP modules might show different
speed information.
Display the wavelength of current SFP module; the wavelength value is got from
the SFP module. Use this column to check if the wavelength values of two nodes
are matched while the fiber connection failed.
Display the support distance of current SFP module; the distance value is got
from the SFP module.
Display the temperature of current SFP DDM module; the temperature value is
got from the SFP DDM module.
User's Manual of IGS-10020HPT-U
116