Table of Contents
Advertisement
Flexibility and Extension Solution
The additional two mini-GBIC slots built in the IGS-10020HPT-U support triple-speed 100/1000/2500BASE-X SFP (small
form-factor pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver
according to not only the transmission distance but also the transmission speed required. The distance can be extended from
300meters to 2km (multi-mode fiber) and to 10/20/30/40/60/70/80/120 kilometers (single-mode fiber or WDM fiber). They are
well suited for applications within the enterprise data centers and distributions.
Intelligent SFP Diagnosis Mechanism
The IGS-10020HPT-U supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to
easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias
current, and transceiver supply voltage.
Modbus TCP provides Flexible Network Connectivity for Factory Automation
With the supported Modbus TCP/IP protocol, the IGS-10020HPT-U can easily integrate with SCADA systems, HMI systems
and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch's
operating information, port information and communication status, thus easily achieving enhanced monitoring and
maintenance of the entire factory.
1588 Time Protocol for Industrial Computing Networks
The IGS-10020HPT-U is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over
packet solutions for IEEE 1588 and synchronous Ethernet.
1.3 How to Use This Manual
This User's Manual is structured as follows:
Section
2, INSTALLATION
The section explains the functions of the Industrial Managed PoE+ Switch and how to physically install the Industrial
Managed PoE+ Switch.
Section
3, SWITCH MANAGEMENT
The section contains the information about the software function of the Industrial Managed PoE+ Switch.
Section
4, WEB CONFIGURATION
The section explains how to manage the Industrial Managed PoE+ Switch by Web interface.
Section 5,
SWITCH OPERATION
The chapter explains how to do the switch operation of the Industrial Managed PoE+ Switch.
Section
6, TROUBLESHOOTING
The chapter explains how to do troubleshooting of the Industrial Managed PoE+ Switch.
Appendix A
The section contains cable information of the Industrial Managed PoE+ Switch.
Appendix B
The section contains glossary information of the Industrial Managed PoE+ Switch.
User's Manual of IGS-10020HPT-U
15
Advertisement
Table of Contents
