Configuring
communications
Define and control how single or multiple projectors are linked with each other and with controlling
device.
Setting network environment
Determine the communication settings such as network setup, serial port information, and so on.
Adjusting LAN setting
Set up network configuration for wire networking.
1. Select Menu > Configuration > Communications > LAN.
2. Set up the appropriate setting:
•
MAC Address—Displays the network MAC address value.
•
Network Status—Displays the network status
•
LAN Interface—Displays the LAN interface. Select either RJ-45 or HDBaseT and press
ENTER to save.
•
DHCP—Enables or disables the DHCP to automatically get IP address, subnet mask, and
so on.
•
IP Address—Assigns the network IP address.
•
Subnet Mask—Assigns the network subnet mask.
•
Default Gateway—Assigns the network default gateway.
•
Primary DNS—Assigns the primary DNS.
•
Secondary DNS—Assigns the secondary DNS.
3. To apply the LAN settings, select Apply.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (02-2022)
Copyright © 2022 Christie Digital Systems USA Inc. All rights reserved.
55