Configuration Network (Wifi Optional) - Alpha ESS SMILE5 Installation, Operation & Maintenance Manual

51
05

CONFIGURATION NETWORK (WIFI OPTIONAL)

Please install the WiFi module. Download and install the APP by scanning the QR code
below, and directly connect to this device by WiFi module.
Login
Register
Step 1: Open AlphaESS APP,
click the "Wi-Fi
Configuration" button and
enter the WiFi configuration
interface
Connect to Connect to Router Router System System
the hotspot the hotspot Configuration Configuration Configuration Configuration
Please make sure that the POWER light of the Wi-Fi
module is always on, and then connect the mobile
phone Wi-Fi to the Wi-Fi Network named after the
S/N number of your product.
Open the Wi-Fi network list
Cancel
Step 3: If your mobile phone hasn' t connected to the system hotspot, please open
the Wi-Fi network list. Please find the hotspot named after the product SN in WLAN
list then enter the password 12345678 and connect to it. After successfully setting it,
please go back to APP and click "Next" .
CONFIGURATION NETWORK (WIFI OPTIONAL)
Connect to Router System
the hotspot Configuration Configuration
Please make sure that the POWER light of the Wi-Fi
module is always on, and then connect the mobile
phone Wi-Fi to the Wi-Fi Network named after the
S/N number of your product.
Next
Step 2: After that please check
whether your mobile phone
has connected to the system
hotspot
CONFIGURATION NETWORK (WIFI OPTIONAL)
Connect to Router System
the hotspot Configuration Configuration
Wi-Fi admin
Change
Enter the password
Password
Submit
Step 4: Enter the WiFi account and password and then save it, the configuration is
successful, click "Next",
On Grid PV Capacity (kW) (kW)
Grid Meter CT Meter
PV Meter CT Meter
Safety Regulations
Submit
Step 5: Set the basic parameters, and you can see the device details , click "Submit"
button.
Safety Regulation Setting: AS4777.2 for Australia, VDE4105/11.18 for Germany,
CEI0-21 for Italy, G98/G99 for Britain, NRS097-2-1 for South Africa, RD1699 for Spain.
For other details please find in Section 9.2.
NOTE: If not registered, please register account according to the hint after
downloading and installing App.
Connect to Router System
the hotspot Configuration Configuration
Successfully configured
Next
Connect to Router System Connect to Router System
the hotspot Configuration Configuration the hotspot Configuration Configuration
Runnig information System information Runnig information System information
Running information System information
S/N:AL2002220050002 S/N:AL4001019000000
Working Status: UPS Model: Storion-Senergy
System Time:2020/05/29 16:54:46 Safety Regulations: AS4777
PV Inverter Power(W): 0 Battery Installed Capacity(kWh): 0.0
Inverter Power(W): 47 On Grid PV Capacity(kW): 5.8
Battery Power(W): 57.9 Meter: 0
Grid Power(W): 0 Inverter Version: V00.00
EMS Version: V1.03.25
BMS Version: V0.00
OK OK
52