Table of Contents
Advertisement
PQRM5300 33 Ux Ix xx xx (PS)
Wiring plan, connecting
to processing unit.
Checking the
connections
20201120-V1
5.12. Connecting to ETHERNET network
The following figure shows the wiring plan, connecting the
devices with ETHERNET option to processing unit.
1. Connect the ETHERNET cable to RJ45 socket, which
located on the backplane of the device.
2. Check the hold of the wires in connector by pulling on
them firmly.
Check if the cables are connected properly (have you
connected all the cables, have you connected to the right
place, do not the cable-ends touch each other).
27
Advertisement
Table of Contents
