Current Threshold - Datcon PQRM5300 33 U I Series Instruction Manual

Function
Sequence of operations 1. Log in the 7. Configurations menu
48

7.3.1.5. Current threshold

When the current threshold function is used on the current
input, the instrument eliminates the input signal under x% of
the input range.
This function may be useful when the power network is
noisy either in voltage off state or in unloaded state and this
effect may cause an error in energy measurement.
[Default: 0.0%]
2. Choose the 7.1. Measure settings menu of the
7. Configurations menu with  /  buttons, and press
the ENTE switch.
3. Choose the 7.1.5. Current threshold menu of the
7.1 Measure settings menu with  /  buttons, and
press the ENTE switch
4. Press the EDIT switch.
5. Type the current threshold value with help  , - , +
switches, and press the OK switch to accept the value.
6. Press the BACK switch to save and to exit from 7.1.5.
Current threshold submenu
PQRM5300 33 Ux Ix xx xx (PS)
20201120-V1