Table of Contents
Advertisement
Sequence of operations 1. Log in the 7. Configurations menu
58
2. Choose the 7.2. Modul #1 settings menu of the
7. Configurations menu with / buttons, and press
the ENTE switch.
3. Choose the 7.2.1 D1 digital output menu of the 7.2. Modul
#1 settings menu with / buttons, and press the
ENTE switch.
4. Select the the Energy 1 limit with switch, and then
Press the SEL switch.
5. Press the OK switch.
6. Select from the menu with switch the output polarity.
When you select the "NO (Normally open)" state then the
output transistor is in off state when there is no pulse on the
output. When you select the "NC (Normally closed" state
then the output transistor is in on state when there is no
pulse on the output.
7. Select the the Energy 2 limit with switch, and then
Press the SEL switch.
8. Press the OK switch.
9. Select from the menu with switch the output polarity.
10. Press the SEL switch.
11. Press the OK switch.
12. Press the BACK switch to exit from Modul #1 settings
submenu
PQRM5300 33 Ux Ix xx xx (PS)
20201120-V1
Advertisement
Table of Contents
