Analogue Output Testing - Datcon PQRM5300 33 U I Series Instruction Manual

PQRM5300 33 Ux Ix xx xx (PS)
Function
Sequence of operations 1. Log in the 7. Configurations menu
20201120-V1

7.4.2.1. Analogue output testing

You can here testing the analouge outputs.
2. Choose the 7.2. Modul #2 settings menu of the
7. Configurations menu with  /  buttons, and press
the ENTE switch.
Contents this menu depends on device construct!
3. Choose the 7.3.1 A1 analog output menu of the 7.3.
Modul #2 settings menu with  /  buttons, and press
the ENTE switch.
4. Press the ENTE switch.
5. Choose the assign menu with  /  buttons, and
press the EDIT switch.
6. Select from the menu with  switch the Test value.
7. Press the OK switch.
8. Choose the 7.3.3. Analogue outputs test menu of the 7.3.
Modul #2 settings menu with  /  buttons, and press
the ENTE switch.
9. Press the EDIT switch.
10. Type the test value with help  , - , + switches, and
press the OK switch to accept the value.
The testvalue displayed on the analogue output.
11. Press the BACK switch to exit from Modul #2 settings
submenu.
61