Table of Contents
Advertisement
32
• THD U (Calculated total harmonic distortion of phase
voltage (up to 19. harmonic ) [%]
• THD I (Calculated total harmonic distortion of phase
current (up to 19. harmonic ) [%]
The device desplayed the following network data in the
L1 L2 L3 phases submenu:
•
U12 (phase voltage between L1and L2 phase),
•
U13 (phase voltage between L1 and L3 phase),
•
U23 (phase voltage between L2 and L3 phase),
•
φ 12 (Measured phase angle between of L1 and L2
phase),
•
φ 13 (Measured phase angle between of L1 and L3
phase),
•
ΣP (Active power of three phase network),
•
ΣQ (Reaactive power of three phase network),
•
ΣS (Apparent power of three phase network),
•
ΣPF (Power factor of three phase network ),
•
f (network frequency),
The 1.5. User dispaly 1 and 1.6. User display 2 submenus
are displayed as specified by the user-measured values
(You can set this display on 6. User settings menu, 6.3. Edit
user display 1 and 6.4. Edit user display 2).
You can set with the ZOOM button the characterize of
displayed measured values. You can move with and
buttons in the menu.
PQRM5300 33 Ux Ix xx xx (PS)
20201120-V1
Advertisement
Table of Contents
