Editing The User Displays - Datcon PQRM5300 33 U I Series Instruction Manual

Three-phase power meter

Table of Contents

PQRM5300 33 Ux Ix xx xx (PS)

Function

Sequence of operations 1. Log in the 6. User settings menu

20201120-V1

7.2.3. Editing the user displays

The device has two special displays. These displays are

editable from user. This displays show just the measure

result of the network. You can edit these displays in the

menu 6.3. Edit user display 1 and 6.4. Edit user display 2.

2. Choose the 6.3 Edit user display 1 or 6.4 Edit user display

2 menu of the 6. User settings menu with  /  buttons,

and press the ENTE switch.

3. Select the line with  switch, and then select the

measured value of network witch  /  switches.

If it is necessary make this operation in the other lines.

4. Press the BACK switch to exit from 6.3. Edit user display

1 or 6.4. Edit user display 2 submenu.

Table of Contents