Total Run Time; What Can Be Displayed; Note; How To Start Up - Barco R9002390 Owner's Manual

Change Language

What can be done ?

The 'Change Language' function offers the possibility to change the language of the screen menus to English, Spanish, French and
German.

How to change the language ?

To change the language, handle as follow :
1. Push the cursor key é or ê to highlight Change Language (menu 1).
2. Press ENTER to display to change language menu.
The language menu will be displayed (menu 2).
3. Push the cursor key é or ê to highlight the desired language.
4. Press ENTER to change to that language.
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
MORE ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1

Total Run Time

What can be displayed ?

The total run time since the first start up can be displayed.

Note

All projectors leave the factory after a burn-in period of approximately 100 hours.

How to start up ?

To select Total Run Time :
1. Push the cursor key é or ê to highlight Total Run Time (menu 1).
2. Press ENTER to activate.
The amount of time the projector has played since its first start up at the factory will be displayed in a text box (men
SERVICE MODE
IDENTIFICATION
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
CHANGE PASSWORD
CHANGE LANGUAGE
RUN TIME
SET TO MIDPOSITION
CONVERGENCE MID
MORE ...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
5976064 BARCOCINE 8 03052000
LANGUAGE
ENGLISH
ESPAÑOL
FRANCAIS
DEUTSCH
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
RUN TIME
110 h
menu 2
Service Mode
8-5