Table of Contents
Advertisement
NO.
Name
1
VGA Input Interface
2
HDMI Input Interface
3
HDMI Output Interface
4
SD Card Slot
External USB
5
Speaker/MIC Jack
6
USB Interface
7
Network Interface
8
Power Interface
9
Factory Restore
To deploy a working video conferencing system, it is recommended for the users to prepare the following
equipment based on your own requirements. The following table is for reference only.
5:
Table
GVC3202 Back Panel
Connect to VGA input devices.
Connect to HDMI input devices.
Note:
The HDMI input interface has higher priority than the VGA
interface when both interfaces are connected.
Connect to HDMI display devices.
Note:
There are 2 HDMI output ports. The interface marked with number
"1" is the primary interface to output primary video. Please make
sure to follow the port order when connecting HDMI port 1 and 2.
When there is only 1 HDMI output, it has to use HDMI output 1.
Connect HDMI port 2 if you have an additional display device.
GVC3202 will not work correctly if connecting HDMI port 2 without
HDMI port 1 connected.
Insert SD card to store call recordings and other necessary files.
Connect to external speakerphone.
Connect to USB cable or USB storage device.
Connect to LAN port.
Connect to power adapter. The arrow indicator on the power
adapter should face upwards when the power adapter is plugged
in.
When GVC3202 is powered up, use a small pin to press the
button one time to reboot.
When powering up GVC3202, keep pressing the button with
a small pin for more than 10 seconds to restore to factory
settings.
GVC3200/GVC3202 User Guide
Version 1.0.3.64
Explanation
P a g e
|
29
Advertisement
Table of Contents
