Ldap Settings; Table 23: Gvc3200/Gvc3202 Ldap Settings Parameters; Figure 58: Ldap Contacts Interface - Grandstream Networks GSGVC3202 User Manual

Here is the main interface of LDAP contacts.

LDAP Settings

Before starting using LDAP on GVC3200/GVC3202, the users must configure the LDAP settings first. Press
the Blue shortcut key on the GVC3200/GVC3202 remote control to access LDAP settings, or the users can
configure it under GVC3200/GVC3202 web UI→Contacts→LDAP page.
Connection Mode
Server Address
Port
Base DN
User Name

Figure 58: LDAP Contacts Interface

Table 23: GVC3200/GVC3202 LDAP Settings Parameters

It is used to select which protocol will be used for LDAP searching,
LDAP or LDAPS.
It is used to configure the URI of the LDAP (Lightweight Directory
Access Protocol) server.
It is used to configure the LDAP server port. The default LDAP port
number is 389.
It is used to configure the LDAP search base. This is the location in
the directory where the search is requested to begin.
Example:
dc=grandstream, dc=com
ou=Boston, dc=grandstream, dc=com
It is used to configure the bind "Username" for querying LDAP servers.
Some LDAP servers allow anonymous binds in which case the setting
can be left blank.
GVC3200/GVC3202 User Guide
Version 1.0.3.64
P a g e | 99