Table of Contents
Advertisement
Notification
Select device notification ringtone from the dropdown list.
Ringtone
Select the audio device that the GVC3200/GVC3202 will use for audio input and
output during call or playing media. The options are "Auto", "Bluetooth", "USB" and
"HDMI".
•
Auto
GVC3200/GVC3202 will automatically detect whether any USB, Bluetooth or
HDMI devices are connected. If only one of them is connected, it will be used as
the
"Bluetooth"→"USB"→"HDMI".
•
Audio Device
Bluetooth
The Bluetooth audio device will be used for audio input and output.
•
USB
The USB audio device will be used for audio input and output.
•
HDMI
The audio input comes from the built-in MIC in GVC3200/GVC3202 and the audio
output comes from HDMI.
The default setting is "Auto".
Using these settings, users can configure ring or tone frequencies based on
parameters from the local telecom provider. By default, they are set to the North
Call Progress
American standard.
Tones:
Frequencies should be configured with known values to avoid uncomfortable high
Ring Back Tone
pitch sounds.
Busy Tone
Syntax: f1=val, f2=val [,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
Reorder Tone
ON is the period of ringing ("On time" in 'ms') while OFF is the period of silence. In
Confirmation
order to set a continuous ring, OFF should be zero. Otherwise, it will ring ON ms and
Tone
a pause of OFF ms and then repeat the pattern. Up to three cadences are supported.
Ring Back Tone:
Call-waiting Tone
Users can configure ring back tone which is the tone the caller will hear before the
callee answers the call. The default value: f1=440@-19,f2=480@-19,c=2000/4000;
audio
device.
If
two
GVC3200/GVC3202 User Guide
Version 1.0.3.64
or
three
are
connected,
the
priority
is
P a g e
|
148
Advertisement
Table of Contents
