Delete Preset; Apply Preset; Initial Position; Figure 20: Initial Position - Grandstream Networks GSGVC3202 User Manual

Delete Preset

Access the preset editing screen, select preset and press the red shortcut key on GVC3200/GVC3202
remote control to delete it.

Apply Preset

If you have already set preset on camera, you can apply preset via one of the following two ways:
•
Access camera screen and press the digital keys on the remote control to adjust camera to the preset.
•
Access preset screen and press the digital keys to switch to the corresponding preset, press the yellow
shortcut key to apply.

Initial Position

Users can also define a preset as initial position when the GVC3200/GVC3202 boots up from
LCD menu→Settings→Peripheral→Camera, three options are available:
•
System default position: The GVC320x will boot up at default camera position.
•
Position when power off: The GVC320x will return to the last position before power off.
•
Custom: The GVC320x will boot up at a custom position. When chosen, users will be redirected
to Preset settings page to set a custom preset.

Figure 20: Initial Position

GVC3200/GVC3202 User Guide
Version 1.0.3.64
P a g e | 54