End Conference; End Meeting Reminder; Figure 42: End Conference - Grandstream Networks GSGVC3202 User Manual

4. Use UP/DOWN/OK navigation keys on the GVC3200/GVC3202 remote control to select the remote
party, e.g., GVC-LAB in the above figure. This will bring up camera control interface.
5. On the GVC3200/GVC3202 remote control, press the navigation keys and zoom in/zoom out buttons
on trackpad to adjust remote camera.

End Conference

To end the conference, tap on END button
to either "Exit Conference" or "End Conference". If GVC3200/GVC3202 is the conference host:
•
Select "Exit conference" so that the GVC host will leave the conference itself while the IPVT
conference will still be going on. The GVC host can join back the conference by pressing the remote
control's button
Note: The conference can be ended by WebRTC host or admin through web portal afterwards as well.
•
Select "End conference" so that the IPVT conference will be ended and all of the other participants
will be disconnected from the IPVT server.
If the conference member hangs up the call, it will be disconnected from the conference, but other parties
in the conference will stay in the conference.

End Meeting Reminder

The maximum duration of an IPVT meeting is 6 hours, a prompt will be shown during meeting 5 minutes before
the server ends the meeting. This is a reminder for customers during the meeting to alarm them that they are
exceeding the maximum duration so that they can take necessary actions.
or press key
in order to continue/end the meeting.

Figure 42: End Conference

GVC3200/GVC3202 User Guide
Version 1.0.3.64
on GVC3200/GVC3202 remote control
P a g e | 80