Table of Contents
Advertisement
If the connection is lost between the Bluetooth device and GVC3200/GVC3202, go to LCD
menu→Settings→Network→Bluetooth and click on the device name under "Paired devices" again to
reconnect.
Using Bluetooth Remote Control
Users could use GVC3200/GVC3202 Bluetooth remote control that comes with the GVC3200/GVC3202
packaging to control and configure a GVC3200/GVC3202. When the GVC3200/GVC3202 boots up for the
first time, a setup wizard will guide the users to pair and connect the remote control to the
GVC3200/GVC3202.
When the remote control is connected to GVC3200/GVC3202, users will see
status bar of the LCD display device.
If the user happens to reset the GVC3200/GVC3202, or unpaired the remote control, the user will need pair
and connect remote control to the GVC3200/GVC3202 again. Please follow the steps below:
1. Connect a USB mouse or open the virtual remote control after logging in GVC3200/GVC3202 web UI.
2. On the LCD display device, go to Settings→Network→Bluetooth.
and click "Search for devices".
3. Select
4. On the remote control, you would like to pair with GVC3200/GVC3202, press "OK" and digit 5 keys at
the same time for about 5 seconds.
5. The pairing and connection process will be initiated and finished in a few seconds. Please do not press
any keys on the remote control or switch screens during this process to avoid connection failure.
Figure 15: GVC3200/GVC3202 Bluetooth - Paired Device
GVC3200/GVC3202 User Guide
Version 1.0.3.64
icon on the top
P a g e
|
46
Advertisement
Table of Contents
