Truma S 3004 / S 5004
Table of Contents
1
1�1
1�2
Validity ����������������������������������������������������������� 17
1�3
Target group �������������������������������������������������� 17
1�4
Supporting documents ��������������������������������� 17
1�5
1�6
Warnings ������������������������������������������������������� 18
1�7
2
Installation �������������������������������������������������� 19
2�1
2�2
2�3
2�4
2�5
2�6
2�7
2�8
2�9
2�11
2�12
2�14
30090-00314 · 01 · 07/2022
1
About these instructions
1.1
Document number
The document number of the instructions can be found
in the footer on every page and on the back page�
The document number consists of
Part number (10 digits)
•
Revision status (2 digits)
•
Publication date (month/year)
•
1.2
Validity
These instructions apply to the Truma S 3004 and
S 5004�
1.3
Target group
These instruction are intended for experts�
Only competent, trained personnel (experts)
may install and repair the Truma product
and carry out the function check with con-
sideration of the installation and operating
instructions and the current recognised rules
of engineering� Experts are persons who, based on their
professional training, their knowledge of and experience
with Truma products and the relevant standards, are
able to carry out the required work properly and recog-
nise potential hazards�
For the sake of simplicity, in the following, no dis-
tinction is made between genders� Gender equality
is intended in the way terms are used�
1.4
Supporting documents
Further information about this appliance, such as its
purpose, safety instructions, product description, opera-
tion, technical specifications or guarantee can be found
in the associated operating instructions�
If optional accessories, such as the Ultraheat addi-
tional heater, fan, lighting kit, etc� are installed, the
relevant operating and installation instructions must be
observed�
1.5
Symbols and means of
representation
Symbol
Meaning
Warning regarding dangers for persons
Expert
Additional information
Symbol for an action step: Something
must be done here� In case of several
measures, observe the correct sequence
*
Optional parts
About these instructions
EN
17