Table of Contents
Advertisement
Chapter 7: Care and Cleaning
Cleaning & Disinfection
Use only the substances approved by the manufacturer and methods listed in this chapter to
clean or disinfect your equipment.
Manufacturer makes no claims regarding the efficacy of the listed chemicals or methods as a
means for controlling infection.
For the method to control infection, consult your hospital's Infection Control Officer or
Epidemiologist. See also any local policies that apply within your hospital.
Warning
• Before cleaning the electrocardiograph or the accessories, make sure that the
equipment is switched off and disconnected from the power line.
• Sterilization may cause damage to ECG device and is therefore not recommended for
this device otherwise indicated in the instructions delivered with accessories or your
hospital's maintenance schedule.
• If you see any signs of damage or deterioration in the device and its accessories, do
not use it, and if necessary, contact the After-sales service.
• Allow the device to dry completely before making connections. Make sure all
connections are secure before using the system.
Note
• DENA 1210 and accessories should be kept away from dust.
• Do not use detergents that contain ammonia or acetone.
• Most cleaning agents must be diluted before use.
• Don't use rough or sharp material or your fingernail to remove stubborn stains.
• Do not let the cleaning agent enters into the chassis of the system.
• Do not leave the cleaning agents on any part of the equipment.
Warning
• Do not use ETO gas to disinfect DENA 1210.
External surfaces of the device
In-between patients and as required, wipe gently using a moist cloth and warm soapy water or
mild detergent to clean the device and
or N-propanol for its disinfection.
Display screen
In-between patients and as required use clean and soft cloth with screen cleaner or mild soapy
water and with Isopropyl alcohol may be used for cleaning and disinfection.
Note
• Take extra care when cleaning the screen of the monitor because it is more sensitive
to rough cleaning methods than the housing.
• Avoid direct spray of a liquid on the screen.
also recommended to use 70% alcohol or Isopropyl alcohol
54
Advertisement
Table of Contents
Troubleshooting
