Table of Contents
Advertisement
Chapter 7: Care and Cleaning
The following table summarizes the methods of cleaning, disinfecting and sterilizing the
various parts of the device:
Device arts
External surface
Trolley
Display screen
Recorder (print head)
ECG accessory
(Cables, Lead wires
Electrodes)
Single-use
Cleaning
-
In-between patients and as
required wipe gently using a
moist cloth and warm soapy
water or mild detergent.
-
-
In-between patients and as
required:
Clean and soft cloth with
screen cleaner or mild soapy
water.
-
as required:
1.Gently wipe around the
print head using cotton swabs
dampened with alcohol.
2.After
the
completely been dried, reload
the paper and close the
recorder door.
Disposable
According to the instructions delivered with the reusable accessories
electrodes
To clean, disinfect and sterilize reusable accessories, refer to the instructions
Disinfection
In-between patients and
as required use
■ Alcohol 70%
■ Isopropyl alcohol
■ N-propanol
In-between patients and
as required use
■ Isopropyl alcohol
Use as required
■ Isopropyl alcohol
alcohol
has
delivered with them.
56
Sterilization
To avoid extended
damage
to
the
equipment,
sterilization
is
not
recommended for this
device,
related
products, accessories
or
supplies
unless
otherwise indicated in
the Instructions for
Use that accompany
the accessories and
supplies
or
when
stipulated
as
necessary
in
the
Hospital Maintenance
Schedule.
Advertisement
Table of Contents
Troubleshooting
