Chapter 1: Introduction
This key is used to turn the device ON and OFF. Its indicator lights green
①
when the device is ON.
Battery indicator (when the battery is fully charged it is green, otherwise
②
it is orange).
③AC
Indicates the presence of AC power in the device.
Pressing this key can record ECG signals, and pressing this key again
Start/Stop
④
will stop recording.
Used to change the display mode of signals to full-screen or normal
⑤
Layout
mode.
Used to review stored data and recall records.
⑥
Archive
Used to access device settings.
⑦
Settings
Used to reset the Drift filter and return signals quickly to the screen.
Refresh
⑧
Used to record 1mv calibration signal.
⑨
Calib.
⑩
Used to retrieve the last saved record.
Copy
⑪
Used to set the recording speed.
Speed
Used to enter the recording mode selection menu.
Mode
⑫
Used to set the amplitude of the ECG waveform on the main screen and
⑬
Gain
the record.
▲Lead
Used to select the next lead / group of leads.
⑭
Lead▼
⑮
Used to select previous lead / group of leads.
⑯
Pressing this key will return to the home screen.
Menu
Used to move between menus.
⑰
Arrow keys
⑱
Used to enter menus or select the desired option.
Enter
Warning
• Before starting work with the Dena 1210 electrocardiograph, first check all the keys
and make sure that they work correctly.
• Do not use sharp objects to touch the screen.
Table 1-1 Functional keys and Indicators
7