Saadat DENA 1210 User Manual page 57

Chapter 6: Data management
The following information about each saved record can be seen in the Archive window:
• Date and time of recording
• Patient ID (if any)
• Patient name (if any)
• Filter settings at the time of recording
• Speed, mode and gain of recording
• Recording mode: If the save is done in Rhythm mode, the letter "R" is displayed and in
Periodic mode, the letter "P" is displayed. Thus, if the storage is in both Rhythm mode
and Periodic, the phrase "PR" is displayed.
• Heart rate: displayed on the top right of the signals, inside the heart shape. (if any)
To access the previous and next records, just drag the list to the bottom and top of the page.
Search: There is a search option on the right side of the Header area. By selecting this
option, the virtual keyboard (Figure 2-8) is displayed, which by entering all or part of
the name or ID of the desired patient, all the stored information that contains the entered phrase
is displayed. At the bottom of the page, the number of records found and the total number of
records are displayed.
Note
• The information in this window is related to the recording time.
• Using the key
• In this page, by pressing the Start / Stop key from the keypad or touching it on the
screen, ECG signals stored can be printed in conditions quite similar to the recording
time.
• The blue symbols in the waveforms indicate the beginning of the signal.
• If the record is done in 3+ or 6+ modes, the rhythm leads will not be saved. Therefore,
they will not be recorded when recording the saved files.
in the upper left corner of the screen, returns to the home screen.
47