Cleaning And Disinfecting - Saadat SHOOKA User Manual

Electroshock
Table of Contents

Advertisement

7

Cleaning and disinfecting

Casing
• Exterior surface of the device, including battery pack, should be cleaned and disinfected
after each use. Use a dampened cloth with soap and water, ammonia-based cleaners or
70% isopropyl alcohol in this case.
• Do not let the cleaning agent enter into the housing of the system. (And specially in the
port of connector).
• Dry out the cleaning agents on any part of the device.
PADs
• The only parts of the AED which are in direct contact with patients are disposal PADs
and because they are just for one-time use, they do not transfer any contaminants to
patients. Thus, there is no need for cleaning and disinfecting,
• Do not sterilize the SHOOKA AED and its accessories.
LCD
• Do not wipe the display with dry cloth. It might cause scratch.
• Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent
damage to the polarizer.
The following table summarizes the methods of cleaning, disinfecting and sterilizing for
different parts of the device:
Device parts
External surface of device
including battery pack
PADs
LCD
Single-use
Cleaning
Must be cleaned and disinfected after each use,
using a dampened cloth with soap and water,
-
ammonia-based cleaners or 70% isopropyl alcohol.
PADs are just for one-time use and there is no need
disposable
Only use a soft sloth with IPA to wipe the
-
Disinfection
for cleaning and disinfecting.
polarizer.
Sterilization
Do not
sterilize the
SHOOKA
AED and its
accessories.
25

Advertisement

Table of Contents
loading

Table of Contents