General Information; Archive Menu - Saadat DENA 1210 User Manual

Electrocardiograph

Hide thumbs Also See for DENA 1210:

Table of Contents

Chapter 6: Data management

General information

All ECG recorded data in Auto and Rhythm modes, as well as Periodic recordings, will be

stored in the internal memory of DENA 1210 for future reference. For this purpose, the Save

option in User settings menu should be Enable. In case of disabling the Save option no data is

saved in the Archive.

Up to 500 records can be stored in the internal memory. When the memory is full the new data

will overwrite the oldest data.

In order to transfer or delete stored data, data can be accessed via the "Transfer" section in the

Setting menu and transferred to flash memory, or erased from the device memory.

Note

•

Signal storage is always done as Sync.

Selecting Archive from the header area will open this window:

Figure 6-1 Archive menu

By entering the Archive menu, the saved signals along with the recording date and time, ID

and Name are visible in the list on the right side of the page. By selecting any of the records

from this list, that record will be marked with a distinct color in the list and more information

such as filters, recording mode, etc. will be displayed. The stored signals are also displayed in

the space to the left of this window (where the signals are drawn). The number of records saved

is displayed at the bottom of the page.

Table of Contents