Recording Types; Manual Recording; Automatic Recording - Saadat DENA 1210 User Manual

Chapter 4: Recording Operation
Note
• Refer to System settings chapter to view the recording settings.
• Recording starts by pressing the Start/Stop key and during this operation, the color
of the key changes on the screen and the lock symbol appears in the background. As
long as the screen is in this mode, all keys and menus except the Start/Stop key (and
the Lead▼ and ▲Lead keys in manual mode) will be inactive.

Recording Types

Manual Recording

It has 3+, 6, 6+ and 12 types which can be adjusted using the Mode key on the keyboard or Rec
Mode menu. on the screen.
In this mode, by pressing the "Start / Stop" key on the front panel or touch screen of the device,
recording begins and the recording continues until the "Start / Stop" key is pressed again.
Also, during recording, you can change the group of leads being recorded with the help of
Lead▼ and ▲Lead keys. Selected labels are displayed in red color.
It should be noted that only the selected leads will be recorded.
• Manual 3+: In this case, the three selected leads will be recorded, along with one to
three selected Long Lead(s). In the record, the top three waveforms represent the
selected leads and the bottom waveform(s) represent the Long Lead(s).
• Manual 6: In this case, the six selected leads will be recorded.
• Manual 6+: In this case, the six selected leads will be recorded, along with one to three
selected Long leads. In the record, the top six waveforms represent the selected leads
and the bottom waveform(s) represent the Long Lead(s).
• Manual 12: In this case, the leads will be recorded in a set of 12.

Automatic Recording

It has 3+, 6, 6+ and 12 types which can be adjusted using the Mode key on the keyboard or Rec
Mode menu. on the screen.
Pressing the "Start / Stop" button on the front panel of the device starts recording and after the
time specified in the Rec. Setting → Rec Time from the 3 to 12 second options, the recording
ends automatically.
In this mode, it is not possible to switch between different leads with the Lead▼ and ▲Lead
keys, and the switches are changed automatically at the specified schedule.
• Auto 3+: In this case, groups of 3 leads will be recorded along with one to a maximum
of three selected Long leads. In the record, the top three waveforms represent the leads
that are automatically recorded, and the bottom waveform(s) represent the Long
Lead(s).
• Auto 6: In this case, the leads will be recorded in sets of 6.
• Auto 6+: In this case, groups of 6 leads will be recorded along with one to a maximum
of three selected Long Leads. In the record, the top six waveforms represent the leads
that are automatically recorded, and the bottom waveform(s) represent the Long
Lead(s).
• Auto 12: In this case, the leads will be recorded in a set of 12.
36