Table of Contents
Advertisement
Chapter 2: System settings
Recording: At the top of this page, you can select the internal thermal recorder or
external printer. Touching the green Rec Test key will draw a test signal.
The Periodic Recording Interval section is used to enable / disable periodic mode. By setting
the Periodic Interval other than off, the intervals of the periodic recordings are determined and
the Periodic Repetition option is available to adjust the number of repetitions of the periodic
recordings. By activating the periodic mode, the counters of the number of remaining records
and the time remaining until the start of the next record are displayed at the top of the main
screen (as shown in Figure 1-3-
Note
• Refer to Recording Operation chapter for more details.
Transfer: This page is used to transfer or erase information from the device's internal
storage.
Note
• Refer to Data Management chapter for more details.
).
Figure 2-11 Recording setting menu
25
Advertisement
Table of Contents
Troubleshooting
